The best wearing rails, which often give contradictory results with the
tensile test, were comparatively pure manganese steels, low in silicon,
only exceptionally up to 0.2 per cent., but generally below 0.1 per
cent., and with less than 0.1 per cent. of phosphorus and sulphur. On the
other hand, rails with a tendency to break or split are low in carbon,
with variable proportions of manganese, but contain much silicon, 0.3 to
0.9 per cent., and often above 0.1 per cent. of phosphorus. Another
series of experiments upon rails for the Finland lines made by the author
in 1879-80 shows the high quality of manganese steel. These are
essentially highly carburized (0.3-0.4 per cent. carbon) with 0.7 to 1.4
per cent. manganese, and have stood three and a half years' wear without
a single one being broken; while those of silicon steel with 0.106-0.144
per cent. carbon, 0.592-0.828 manganese, and 0.423-0.435 silicon have
failed in many cases, showing a great tendency to split. In both of the
latter instances, however, the figures deduced from tensile tests of both
good and bad specimens were substantially the same.
The causes of the difference between the two kinds of steel the author
attributes to differences in the structure of the ingot due to the agent
used in "chemical consolidation," which may be either manganese or
silicon, which structures are illustrated by photographs of ingot
fractures.
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25