of ingots. Taking the time
of a single converting operation at half an hour it will be easy to
obtain fifty blows per day, or a production of 30 tons. This may be
easily increased by placing a second converting crane on the other side
of the furnace, for which the same blowing engine will be sufficient, as
the actual blowing time will not exceed twelve minutes. The labor
required for each converter will be about six men per shift.
The blast required has been experimentally determined at 40-50 cubic
meters per minute at 15 lb. pressure. This will be supplied by a single
cylinder engine of 900 millimeters blast, and 786 millimeters steam
piston, diameter 786 millimeters, stroke making fifty revolutions per
minute, which is also to work a Root blower and the accumulator pumps.
Having regard to these very different demands upon the power of the
engine, it will be provided with expansion gear, allowing a considerable
variation in the cut-off. A single boiler of 70 to 75 square meters
heating surface will be sufficient. The accumulator is intended to work
at 300 lb. pressure.
The cost of the plant, including one of each of the following items,
converter, converter truck, blowing engine, accumulator, ingot crane,
centesimal weighing machine, and accumulator pump, is estimated at L2,050
to L2,100; and that of the steam boiler, L325.
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25