All its principal parts were
imported from England; and a Mr. Hornblower (the son, it is believed, of
the well known engineer of that name) came to this country for the
purpose of putting up and running this engine.
At the time when the manufacture of the engines for the Philadelphia
Water Works was commenced, and as late as the year 1803, we find five
engines, in addition to the one above mentioned, noticed as being used in
this country: two at the Philadelphia Water Works; one just about being
started at the Manhattan Water Works, New York; one in Boston; and one in
Roosevelt's sawmill, New York; also a small one used by Oliver Evans to
grind plaster of Paris, in Philadelphia. Thus, at the period spoken of,
out of seven steam engines known to be in America, four were pumping
engines.
In the coal regions of Pennsylvania, a simple, high pressure, single
acting Bull engine has been extensively adopted; the dimensions usually
run from 36 inches to 80 inches in diameter, and a very common stroke is
10 feet. At the Empire shaft, in the Schuylkill coal region, there is a
very fine pair of these engines, with 80 inch cylinders, working 24 inch
pumps. The stroke of both steam pistons and pumps is 10 feet.
Pages:
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37